|

Robotic Video Pipeline Inspection / CCTV
Download CCTV Flyer .pdf
The growth of our society depends on
reliable infrastructure systems. This is achieved through the
continual inspection, maintenance, and upgrade of the buried utility
structures that provide our communities with water, gas, sewage,
communications, and storm water removal. Ted Berry Company is supplied
with television inspection equipment for internal inspection of sewer
collection, Stormwater collection , and water distribution pipelines,
buried utility duct systems, and almost any other pipeline you may
have above or below ground.
Once
inspections are complete you will receive detailed digital Wincan
V8 reports and videos showing all aspects of your pipeline. Inspection
media will be available in VHS, DVD, or MPEG.
Our Mainline inspection unit is equipped with tracked, wheeled,
storm, large line steerable, pipe skid, and boat transporters
to properly inspect any type or size pipeline you may have. Our team
has inspected pipelines from 2" to 120" in diameter. Our cameras are
360 degree radial pan and tilt with a 40:1 zoom feature.
Our Mini-Cameras are capable of inspecting lines as small as 1 1/4"
made of various materials. Our crews are often called on for
inspections of industrial boiler tubes, turbine inlets, groundwater
monitoring wells, ducts, Ect. (we have even searched for false
teeth in a customers motor home drainage piping!)
Ted Berry Company
has PACP & MACP Certified Operators
NASSCO
Pipeline/Manhole
Assessment
Certification
Program
PACP Program Download
New Fall 2008
MLELS Mainline & Lateral Evaluation & Locating System
We can now inspect
and provide electronic location (512 HZ) of service laterals from the
mainline with the use of our lateral launcher system. A remotely
operated mini-camera mounted directly to a mainline televising system
can inspect up to 80' into a 4"-12" service lateral. This information
has proven very valuable in sanitary sewer system I&I studies
throughout the world.
MLELS System Flyer - Aries LETS
Ask us
about inspecting your "tough" leachate collection system!
 |
 |
 |
 |
|
Granite Culvert 96"
|
Storm crawler |
Broken VCP 8" |
Infiltration AC 8" |
Some of our transporter and camera options are
pictured below
 |
 |
 |

 |
|
The Boat
|
Titan Steerable |
Large Line Kit |
Mini-Cameras |
 |
Tunnel
Inspection May 2007
A large pulp and paper mill had an
important inspection required of a massive 12'
brick arch sewer line. In the past the
inspection was done with divers which is very
dangerous and expensive. The Ted Berry Company
Inspection Team utilized our jet propelled boat
camera to negotiate the 200' foot long tunnels
and perform the inspection. Two tunnels were
inspected in approximately 8 hours with the mill
sewer system in 100% operation. The boat is
fully functional in pipes of all shapes and
sizes above 30" and lengths up to 1000'.
|
Industrial Compliance Inspections
During an important outage a 36" fiberglass acid
line required a compliance inspection. The Ted
Berry Company Team provided a diversion and
isolation of the 5.5 MGD acid flow at 140+-
degrees with a ph of 2-4. During the isolation a
robotic camera was inserted and the pipeline
inspected. During the diversion, isolation, and
inspection the mill process was kept in 100%
operation.
Find Infiltration
at a manhole?
Ted Berry Company crews use closed cell
polyurethane injection grout to instantly (3
seconds) seal active leaks in manholes, pump
stations, and other structures. Our material has
an industry leading reaction time of under 3
seconds and does not shrink! Please ask a
representative for more info and pricing.
Has your
newly installed PVC sewer main failed a deflection
or mandrel test?
The Ted Berry Company
Trenchless Technologies Team now offers a
solution.
|
Pipe Rerounders
for PVC Pipe |
-
Restores
deflected sewer pipes back to within
tolerances - A powerful high frequency
vibration consolidates and stabilizes
material around the pipe to keep deflections
from returning.
-
Only smooth
contoured surfaces come in contact with the
pipe.
-
Vibration is
transmitted radially. There is no impact
force driving the rerounder forward.
-
With vibration
doing most of the work, 300 lb. to 2000 lb.
of pulling force is usually adequate. In
most cases 500 lb. is enough.
|
|